I just received this 3/16 double bead plane from Patrick Leach of The Superior Works. It is boxed with boxwood and made of quartersawn beech. The double bead allows you to plane in both directions so you can always plane with the grain and allows you to put a bead on both sides of a board. The heel (the back of the plane) is stamped “3/16” and “1881”. The toe (the front of the plane) is stamped “J. KELLOGG” and “AMHERST MS.” After a little research here is what I found out about the plane & maker:
Source: Davistown MuseumDATM InformationJames was part of Kellogg, Fox & Washburn until 1839, Kellogg & Fox from 1839-1840 and J. Kellogg & Son from 1865-1867. William Kellogg, his son, continued to use his mark after his retirement in 1867Identifying MarksJ.KELLOGG/AMHERST.MSGeneral InformationKellog’s first company was purchased from Eli Dickinson and became a wildly successful manufacturer of planes. At one point, a portion of Amherst was called “Kelloggville” and was occupied by two of his factories; even producing 150 to 200 planes a day, they were often unable to fill all the orders they received. They are often deemed the highest quality planes ever manufactured on a large scale and collectors abound on the internet praising their worth. In 1886, the dam supplying power for the factories was washed away and production remained idle for several years.
I’m going to clean this up and put it to use very soon. Thank you Patrick.
No comments:
Post a Comment